25.6"X, 15.7"Y, 15.7"Z, MAKINO MAX 65, 12000 RPM SPINDLE, 33.5"X17.7" TBL, 2002,   Our stock number: 3790









STANDARD CATALOG SPECIFICATIONS

GENERAL SPECIFICATIONS: METRIC & ENGLISH

Table Size (metric type):850 x 450 mm33.5" x 17.7"
X-Axis Travel, Programmable:650 mm 25.6"
Y-Axis Travel, Programmable:400 mm 15.7"
Z-Axis Travel, Programmable:400 mm 15.7"
Type of Axis DrivesAC Digital Servo Motors
Bed ConstructionMeehanite Cast Iron
Axis Design (X & Y)Linear Guide (#45 Guide Truck)
Z AxisBoxway
Origin Position:
X, Y and Z Axes(+) End of Stroke
Origin DetectionGrid Detecting System
Linear Positioning Accuracy - (with proper foundation and

environmental control):
X, Y and Z-Axes Standard 0.003 mm 0.000120"
With Moir Scales 0.0015 mm 0.000060"
Repeatability:
X, Y and Z-Axes Standard 0.002 mm 0.000080"
With Moir Scales 0.001 mm 0.000040

FEEDS:

Rapid Traverse Rates:
X & Y Axes30,000 mm/min.1181 ipm
Z Axis24,000 mm/min.944 ipm
Feed Rate - X, Y & Z Axes1 to 24,000 mm/min.944 ipm
CNC Command Feedback -
X, Y, Z AxesAbsolute Pulse Encoder Feedback System
Rapid Traverse OverrideMin. to 100% (7 steps)
Cutting Feed Override0 to 200% (21 steps, 10% increments)

SPINDLE:

Spindle Nose Taper7/24 No. 40 Taper
Tool Shank Types (Standard)JIS B6339 40T
Tool Clamping Force750 kgf1,650 lbs.
Tool Clamping MethodRetention Stud, coned disc spring clamp
Spindle Drive Motor - AC:
15 Minute Rating9 kW12 hp
Continuous Rating7.5 kW10 hp
Spindle Torque Characteristics (80-607 rpm):
15 Minute Rating11.9 kgf.m85 ft. lbs.
Continuous Rating9.7 kgf.m70 ft. lbs.
Spindle Speed Range80 to 12,000 rpm
Spindle Speed Increment1 rpm
Number of Spindle Speed Ranges2
Obtain Full Horsepower2000 rpm
Constant Torque Range80 to 607 rpm
Spindle Temperature Controller (machine
temperature synchronous type)Oilmatic
Spindle Front Bearing TypeAngular contact, Ceramic Ball Type
Spindle Front Bearing I.D.70 mm2.76"
Spindle Orientation SystemElectric Servo Type
Spindle Speed Override50% to 120% (8 steps, 10% incrmeents)
Spindle Nose to Table150 mm to 550 mm5.9" to 21.7"

TABLE:

Type of TableRectangular Type
Work Area on Table850 x 450 mm33.5" x 17.7"
Table Load Capacity400kg880 lbs.
Maximum Workpiece Size:
Length of Workpiece650 mm25.6"
Depth of Workpiece400 mm15.7"
Height of Workpiece400 mm15.7"
Table Top Configuration
Size of T-Slot/Number18H8 x 3
Height of Table Top from Floor850 mm33.5"

AUTOMATIC TOOL CHANGER:

Capacity:Standard20 Tools
Optional30 Tools
Maximum Tool Size Diameter:
Adjacent Pockets Empty90 mm3.5"
All Pockets Full76.2 mm 3"
Maximum Tool Length300 mm11.8"
Maximum Tool Weight7 kg15.4 lbs.
Tool Selection MethodRandom Selection (fixed address method)
Tool Change Time:
Tool-to-Tool3 seconds
Chip-to-chip7 seconds

UTILITIES:

Air Supply for Use on Machine:
Pressure5 kg/cm271.5 psi
Consumption.4 m3 / min.14.125 ft3/min.
Electrical Specifications:
Volts230 or 460
Phase3
Hertz60
KVA21
Air Dryer SpecificationsInlet Air Temperature of 35 degree C or

below.


MOTORS:

For Standard Spindle9/7.5 kW12/10 hp
For X, and Y Axes2.8 kW x 23.75 hp x 2
For Z axis4.4 kW5.9 hp
For ATC magazine motor.5 kW.7 hp
For Spindle Lubricant Pump.004 kW.005 hp
For 2 Nozzle Coolant System..92 kW1.23 hp

CUTTING CHIP DISPOSAL OPTIONS:

Coolant System (2 nozzle system):
Volume65 l/min.17.2 gal/min.
Reservoir Capacity:
Standard System205 liters54 gal.

SIZE OF MACHINE:

Machine Height:2590 mm102"

Size of Required Floor Space (W x D) (NC door closed):
MAX65S2130 x 2165 mm83.9" x 85.2"

Machine Weight:
MAX65S4,500 kg9,900 lbs.










For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   


Send this page to a friend      Subscribe to our inventory RSS feed