General Specifications for LNS Type HYS 6.32 HS-4.8 barfeed
          
          Consisting of:
            A three-piece aluminum profile barrel assembly containing 6 steel guide
            tubes aranged in a concentric circle with manual indexing ring at the rear,
            and an automatics centering system at the front of the tube, with an electro-
            mechanical end of bar signal.
          
          Six (6) guide tubes with internal diameters of:
            1.339" for 1-3/32" to 1-1/4"  diameter barstock
            1.181" for 1"      to 1-3/32" diameter barstock
            1.063" for 3/4"    to 1"      diameter barstock
             .827" for 1/2"    to 3/4"    diameter barstock
             .551" for 1/4"    to 1/2"    diameter barstock
             .315" for 1/16"   to 1/4"    diameter barstock
          
          Equipped With:
            A 23" Z-axis retract system with a safety switch and a kill switch to
          
          prevent spindle on sliding headstock lathes from accidentally backing into bar
          
          feed, precluding costly downtime and equipment repairs.
                - allows for machining different length workpieces
                - retract permits the bar feed to reach the recessed spindle
          
          Originally configured for Tornos Deco
          Barfeed:  204" x 41" x 50" 2,500 lbs
          Hydraulic Tank (can fit under barfeed): 37" x 20" x 27" 150 lbs
          Manuals on CD
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com