Made In Canada
Year 1979


Machine Specifications:

SWING OVER BED: 22"
SWING OVER BED AND SADDLE WAYS: 20"
SWING OVER CROSS SLIDE: 12"
CENTER DISTANCE: 80"
MAIN DRIVE MOTOR: 15 HP
BAR CAPACITY 3"

HEADSTOCK
SPINDLE SPEEDS (18): 27 - 1600 RPM
SPINDLE NOSE - CAMLOCK: D1-8"
THROUGH HOLE IN SPINDLE: 3.06"
SPINDLE CENTER: #5 MT

GEAR BOX
FEED AND THREAD SELECTIONS: 66
INCH FEED RANGE: .0015 - .105 IPR
INCH THREAD RANGE: 2 TO 127 TPI
METRIC FEED RANGE: .04 TO 2.67 MM/REV
METRIC LEAD RANGE: .2 TO 14 MM

APRON
HANDWHEEL - ONE REVOLUTION: 1"
HALF NUTS: DOUBLE
HIGH SPEED THREADING TO: 800 RPM
REPEATABILITY OF AUTO CARRIAGE STOP: +.005"
FEED TORQUE CONTROL: VARIABLE

CARRIAGE CROSS-SLIDE
CARRIAGE LENGTH ON BED: 21"
CARRIAGE BRIDGE WIDTH: 10"
CROSS-SLIDE LENGTH: 24"
CROSS-SLIDE TRAVEL: 12"
COMPOUND TRAVEL: 5"
DIRECT READING DIAL GRADUATION: .001"

TAILSTOCK
QUILL DIAMETER: 2.94"
QUILL TRAVEL: 8"
MORSE TAPER: #5 MT
OFFSET: +.75"

BED AND BASE
BED WIDTH: 14"
BED DEPTH: 12-1/2"
BED LENGTH: 124"
BASE LENGTH: 134"
BASE WIDTH: 30"

GENERAL
DIMENSIONS, APPROX: 11' LR X 4' FB X 4'8" H
ELECTRICS: 220 VOLTS, 3 PH, 60 CYC


Equipped With:
12" 3 Jaw Chuck
12" Face Plate
10" Steady Rest
Live Center
Chip Pans
In/Mt Threading
Thread Dial
Taper Attachment



*See attached warranty, terms, machine use and safety.
**These specifications are subject to verification upon inspection.

Scott Machinery & Supply Inc
PO Box 430 Helena AL 35080-0430
Tel: 205-664-9644 Fax: 205-664-9796
Email (Request Quote): info@scottmach.com
Web: www.scottmach.com