Used Equipment
Used Equipment Used Equipment Network
Sign On  (Which am I?)
 User Email:    
Dealer Dlr#:      PW:  
Used Equipment
Used Equipment
Used Equipment
Buying Equipment
 >Recent Listings
 >Browse Listings
 >Enter Wanted
 >Periodic Bulletins
Selling Equipment
 >See Wanteds
 >Enter For-Sale
Dealers & Services
 >Search Dealers
 >Dealers by Specialty
 >Services & Supplies
 >Recent Brochures
How to Use UEN
 >Buying Equipment
 >Selling Equipment
 >Specialties & Categories
How to Advertise
 >Equipment Dealers
 >Services & Supplies

Used Equipment Directory

feedburner   Subscribe to RSS

SITE HELP?
973-625-9292

EMAIL

UEN static site
Used Equipment Directory

Used Equipment
Home   >   Machinery International Corp   >   December 11 2017


0C3865 COMPLETE PLANTS
COPPER ROD AND TUBE PLANT (10734) Ref: 10734

COPPER ROD AND TUBE PLANT (10734)
           
           

          
          
          MACHINE # 10734
          
          
          MACHINERY INTERNATIONAL CORPORATION IS PLEASED TO OFFER A MODERN PLANT
          
          FACILITY TO MANUFACTURE UP TO 5000 METRIC TONS OF COPPER ROD PLUS
          
          4500 METRIC TONS OF COPPER TUBE ANNUALLY USING THE UPCAST SYSTEM. THE PLANT,
          
          WHICH WAS INSTALLED WITH MOSTLY NEW MACHINERY IN 1996, HAS THE CAPACITY TO
          
          TRIPLE THIS PRODUCTION USING THE EXISTING DOWNSTREAM MACHINERY BY ADDING
          
          ADDITIONAL CASTING CAPABILITY, SUCH AS TWO ADDITIONAL UPCAST UNITS.
          
          THE MACHINERY CAN BE PURCHASED SEPARATELY FOR RELOCATION FOR THE PRICE WHICH
          
          WILL BE SENT TO YOU IF YOU REQUEST A QUOTE. HOWEVER WE CAN ALSO SELL YOU THE
          
          LAND AND BUILDINGS, AND YOU CAN START UP AND RUN THE PLANT ON SITE ALMOST
          
          IMMEDIATELY. THE PLANT IS LOCATED IN AN INDUSTRIAL PARK IN MEXICO, WHERE LABOR
          
          COSTS ARE VERY LOW. IT WAS DESIGNED TO BE DEVELOPED IN FOUR STAGES.  ONLY
          
          STAGE 1 WAS COMPLETED. THE FOUNDATIONS HAVE BEEN POURED FOR STAGE 2. THE
          
          ADJOINING LAND FOR STAGES 3 AND 4 ARE AVAILABLE.  THUS THE PROPERTY CAN BE
          
          PURCHASED FOR AN ADDITIONAL PRICE FOR RAPID START-UP AND EXPANSION ON THE
          
          EXISTING SITE.
          
          TECHNICAL ASSISTANCE FOR INSTALLATION AND START-UP EITHER ON THE EXISTING
          
          SITE OR AT A NEW LOCATION IS AVAILABLE FOR AN ADDITIONAL COST. A DESCRIPTION
          
          OF THE MACHINERY FOLLOWS.
          
          A. UPWARD CONTINUOUS CASTING UNIT
          
          AA. PRODUCTION LINE - COPPER ROD
          
           MODEL #: UTY 4.5 / C8 
           YEAR: 1996
           COUNTRY OF ORIGIN: CHINA
           ACQUISITION DATE:
           - SALE AGREEMENT DATE: JUNE, 25, 1995 
           - INVOICE DATE: JULY, 08, 1996
           - EQUIPMENT ARRIVED TO MEXICO: SEPTEMBER 1996
           - 1ST INSTALLATION TECHNICIANS TEAM ARRIVED TO MEXICO: NOVEMBER, 30, 1996
           - ONE SINGLE EXTRA TECHNICIAN ARRIVED: APRIL 1, 1997
           - 2ND INSTALLATION TECHNICIANS TEAM ARRIVED: OCTOBER, 14, 1997
           - DURING 1998 UNLOADED AND LOADED TEST RUNS WERE PRACTICED
             THE END OF 1998 REAL PRODUCTION STARTED
          
           INSTALLATION INCLUDED THE LAY OF FOUNDATION, MACHINERY ASSEMBLY, CONNECTION
          
           OF ELECTRICAL POWER, UNLOADED AND LOADED TEST RUNS, AMONG OTHER DUTIES.
          
           BEFORE SHUTTING DOWN THE PLANT, MAINTENANCE WAS DONE TO THE UPWARD CONTINUOUS
          
           CASTING UNIT.
          
           THE INDUCTORS AND BOTH CRUCIBLES WERE ASSEMBLED WITH A LONG-LIFE REFRACTORY
          
           LINING MATERIAL NAMED: V - CAST - 426
          
           WITH THIS MATERIAL AND PROPER OPERATION THE FURNACES CAN WORK WITHOUT MAJOR
          
          MAINTENANCE AT A TEMPERATURE OF 1500 DEG. CELSIUS  (2732 DEG. FAHRENHEIT).
          
          COPPER MELTING INDEX IS 1084 DEG. C (1903 DEG. F)
          
           IF THE FURNACES ARE OPERATED WITH ALUMINUM, THE LIFE OF THE REFRACTORY
          
           MATERIAL CAN BE EXTENDED DUE TO THE ALUMINUM WORKING TEMP. 750 DEG. C.
          
           I. MAIN TECHNICAL DATA
           ANNUAL CAPACITY: 
           4,000 TONS OF OXYGEN FREE COPPER ROD, BASED ON 7,000 WORKING HOURS
           5,000 TONS OF OXYGEN FREE COPPER ROD, BASED IN 365 WORKING DAYS.
           Note: IN ADDITION THE PLANT CAN ALSO PRODUCE 4500 TONS COPPER TUBE
           DOWNSTREAM EQUIPMENT CAN PRODUCE TRIPLE THIS AMOUNT WITH THE ADDITION OF TWO
          
           MORE CASTERS
          
           DIAMETER OF ROD: 20mm
           TOTAL POWER: 360 KW
          
          II. PRODUCT
           OXYGEN-FREE COPPER ROD UNDER CAST CONDITION WITH HIGH CONDUCTIVITY
           DIAMETER OF ROD: 20mm
           COILING WEIGHT: 1.5 ~ 2 T.
           DENSITY OF ROD: 8.9 KG/DM3
           TENSILE STRENGTH OF ROD: >= 170 N/mm2
           ELONGATION RATE: > = 35%
           CONDUCTIVITY OF ROD: 100% - 102% IACS, MEASURED UNDER ROOM TEMPERATURE
           20 DEG. C WHEN THE DIAMETER OF THE ROD IS REDUCED TO 2mm AND THE ROD
           IS IN SOFT STATE AFTER BEING ANNEALED.
          
           CONTENT OF OXYGEN: <= 2 PPM
          
           DURING UPCASTING, STROKES OR MARKS CAUSED BY INTERMITTENT MOVEMENT OR BY
          
           ROLLERS ARE NOT REGARDED AS DEFECTS.
          
          III. RAW MATERIALS 
           HIGH QUALITY PURE COPPER CATHODE, WHICH CAN BE MIXED WITH CLEAN COPPER
          
           SCRAP IN LESS THAN 5% ~ 8% OF THE TOTAL MATERIALS.
          
           THE COPPER CATHODE HAS THE CHEMICAL PROPERTIES AS FOLLOWS:
           - CU + AG >= 99.97%
           - FE >= 10 PPM
           - BI <=  5 PPM
           - P  <=  3 PPM
           - S  <= 20 PPM
           - PB <=  5 PPM
          
           THE TOTAL AMOUNT OF THIS SIX ELEMENTS SUCH AS FE + SI + SN + NI + ZN + CO
           MUST BE LESS THAN 20 PPM.
          
           INCLUSIONS THAT AFFECT THE CONDUCTIVITY OF THE ROD, OR THAT CAN INCREASE
          
           THE CONTENT OF OXYGEN MUST BE AS MINIMAL AS POSSIBLE.
          
           LOSS: DURING NORMAL OPERATION, THE LOSS IS LESS THAN 5% OF THE TOTAL
          
           MATERIAL CHARGED.
          
          1. COPPER ROD UPWARD CASTING MACHINE, 1 SET
           MODEL UTY - 4.5 / 8
          
          1.1.1. 5-TON MELTING FURNACE 
           TYPE OF FURNACE: MAINS - FREQUENCY INDUCTION FURNACE
           RATED VOLUME: 1.5 TON
           TOTAL VOLUME: 2.5 TON
           RATED POWER:  200 KW
           WORKING TEMPERATURE: 1083 DEG. C ~ 1200 DEG. C
           MELTING RATE: 500 ~ 600 KG/H
           MAXIMUM SIZE OF MATERIALS: 700mm x 700mm x 25mm
           CONSUMPTION OF COOLING WATER: 8m3/H
          
           INCLUDING FURNACE BODY, TRESTLE, OIL CYLINDER FOR HYDRAULIC TILTING SYSTEM,
          
           COOLING WATER STAND, 200 KW INDUCTOR, LINING MATERIAL & HYDRAULIC OIL PUMP
          
          1.2. 2-TON HOLDING FURNACE
           TYPE OF FURNACE: MAINS-FREQUENCY INDUCTION FURNACE
           RATED VOLUME:   3 TON
           TOTAL VOLUME: 4.2 TON
           RATED POWER: 100 KW
           WORKING TEMPERATURE: 1140 DEG. C ~ 1160 DEG. C
           CONSUMPTION OF COOLING WATER: 6m3/H
          
           INCLUDING FURNACE BODY, TRESTLE, OIL CYLINDER FOR HYDRAULIC TILTING,
          
           LAUNDER, STAND FOR COOLING WATER, 100 KW INDUCTOR, LINING MATERIALS.
          
           THE HOLDING FURNACE CAN MOVE 2.5m ALONG THE GUIDE RAIL UNDER MANUAL
          
           CONTROL IN ORDER TO TILT LINING MATERIALS.
          
          - FURNACES BY XDR
            XI'AN HEAVY ELECTRIC FURNACE WORKS - 1996
          - INDUCTORS BY XI'AN HEAVY ELECTRIC FURNACE WORKS
          
          1.3. 8-HEAD CONTINUOUS UPWARD MACHINE, 1 SET (OUTOKUMPU STYLE)
           NUMBER OF UPCASTING STRANDS: 8
           DIAMETER OF ROD: 20mm
           UPCASTING SPEED: 800mm/MIN., STEPLESS AND ADJUSTABLE
           UPCASTING PITCH: 3 ~ 6 TIMES, ADJUSTABLE 
           LIQUID LEVEL TRACKING MOTOR: 1.1 KW, AC
           CONSUMPTION OF COOLING WATER: 14.4m3/H
           INCLUDING EIGHT CRYSTALLIZERS (LOWER SECTION), EIGHT DOUBLE-COOLER (UPPER
          
           SECTION), ONE UPCASTING HAUL - OFF MECHANISM, ONE LIQUID LEVEL TRACKING
          
           MECHANISM, ONE OPERATION PLATFORM (TRESTLE TO UPCASTING)
          
          1.4. TWIN-HEAD TAKE-UP COILER
           ROD COILING SIZE: 1500mm OD X 600mm ID X 1000mm W
           WEIGHT OF COIL: 1.5 ~ 2 METRIC TONS
           POWER OF HAUL - OFF MOTOR: 1.1 KW
          
          INCLUDING:
           TWO TAKE-UP CONTROL STANDS
           FOUR TWIN-HEAD TAKE-UP HAUL-OFF UNITS
           EIGHT TAKE-UP TROLLEYS
           
          1.5. COOLING WATER TESTER
           CONSISTING ROTOR FLOW-METER, INLET AND OUTLET PIPES CONNECTED WITH
          
           CRYSTALLIZER, AND 1 TEST-BED FOR CRYSTALLIZER.
          
          1.6. ELECTRICAL CONTROL
           COMPOSED OF ELECTRICAL CABINET, VOLTAGE REGULATOR AND OPERATION DESK.
           OPERATION DESK FOR UPCASTING, CONTROL CABINET FOR STEP MOTOR.
          
          1.7. CO GAS GENERATOR
           AMOUNT OF GAS: 4m3/H
           USED TO GENERATE CO GAS FOR PROTECTION OF THE LAUNDER CONNECTING THE
          
           MELTING FURNACE AND THE HOLDING FURNACE.
           INCLUDES A BLOWER
          
          2. OPERATION DATA
          
          2.1. PRODUCTION CAPACITY
           A THREE-SHIFT WORKING SYSTEM IS REQUIRED IN THE LIGHT OF PARTICULAR WORKING
          
           CONDITIONS AND ECONOMICAL FEATURES.
           - OUTPUT: 5,000 T
           - No. OF RODS: 8 
           - DIAMETER OF THE ROD: 20mm
           - OPERATION TIME:
             52 WEEKS, 8736 HOURS IN A YEAR
             SEVEN DAYS A WEEK, 168 HOURS
             THREE SHIFTS A DAY, 24 HOURS
          
           OPERATION TIME DOES NOT INCLUDE THE TIME SPENT ON REPLACING GRAPHITE DIES
          
           OR CRYSTALLIZERS AS NORMAL MAINTENANCE.
          
          2.2. POWER SUPPLY
           BY PRODUCING EACH ONE-TON OF ROD, THE UPCASTING MACHINE CONSUMES ELECTRICITY
          
           AT 380 KWH/T APPROXIMATELY.
          
           THE AUXILIARY MACHINES, NOT INCLUDING THE FURNACES, CONSUME 85 KW
           MINIMUM INPUT POWER OF THE STAND-BY POWER SUPPLY: 150 KW
          
           THE ABOVE DATA WAS MEASURED WHEN THE MELTING FURNACE IS AT ITS BEST WORKING
          
           STATE WITH MAXIMUM POWER. IF THE FURNACES ARE WORKING AT A LOWER RATE, THE
          
           CONSUMPTION OF ELECTRICITY CAN BE HIGHER BY EACH UNIT OUTPUT. DURING NORMAL
          
           OPERATION, IF POWER SUPPLY STOPS FOR A LONG TIME, THE MELTED COPPER IN THE
          
           FURNACE WILL FREEZE AND WILL DAMAGE. THEREFORE, THERE IS A DIESEL POWER
          
           GENERATOR IN THE PLANT, WHICH STARTS AUTOMATICALLY OR MANUALLY.
          
          2.3. COOLING WATER SUPPLY
          
          2.3.1. NORMAL OPERATION
           WHEN COPPER ROD IS BEING CAST, THE COOLING WATER MUST BE SUPPLIED TO THE
          
           INDUCTOR OF THE FURNACE AND THE CRYSTALLIZERS OF THE UPCASTING MACHINE.
           IT IS VERY IMPORTANT TO ACHIEVE A SATISFACTORILY COOLING RESULT.
          
          CONSUMPTION OF COOLING WATER:
           - INDUCTORS OF FURNACES: 14m3/H
           - CRYSTALLIZER OF UPCASTING MECHANISM: 14.4m3/H
           - PRESSURE OF COOLING WATER: 0.3 ~ 0.6 MPA
           - MAXIMUM INLET WATER TEMPERATURE:  32 DEG. C
           - MAXIMUM RETURN WATER TEMPERATURE: 55 DEG. C
          
          2.3.2. WATER REQUIREMENTS:
           - MAXIMUM CONTENT OF PARTICLES: 10mg/L
           - PH VALUE: 7 ~ 9
           - HARDNESS: 3 ~ 5 DH
           - MAXIMUM THICKNESS OF CL ION: 10mg/L
           - MAXIMUM THICKNESS OF S ION:  50mg/L
           - MAXIMUM THICKNESS OF FREE CL: 3mg/L
           - MAXIMUM CONDUCTIVITY (COOLING WATER FOR INDUCTOR) 300m SIEMENS/CM
          
          2.3.3. EMERGENCY WATER SUPPLY
           AS INSUFFICIENT COOLING WATER WILL CAUSE DAMAGE TO THE EQUIPMENT, TO
          
           GUARANTEE THAT THE COOLING WATER SYSTEM WILL NOT PAUSE FOR OVER 60 SECONDS,
          
           AN EMERGENCY WATER TANK IS INSTALLED FOR INCASE OF A BREAKDOWN. THE EMERGENCY
          
           WATER TANK IS ENOUGH TO OPERATE THE UP-WARD CONTINUOUS CASTING UNIT. THE
          
           SYSTEM WORKS WITH GRAVITY.
          
           EMERGENCY TANK CAPACITY: 12,300 LITERS-12m3
          
           CONSUMPTION IN CASE OF EMERGENCY:
           - MINIMUM CONSUMPTION BY INDUCTORS OF FURNACE: 5m3/H
           - MINIMUM CONSUMPTION BY CRYSTALLIZER: 3m3/H
           - PRESSURE FOR WATER: OVER 200KPA
          
           AN ADDITIONAL AIR-COOLING SYSTEM WAS ADDED TO EACH INDUCTOR, TO MINIMIZE
          
           POTENTIAL TROUBLES DURING NORMAL OPERATION
          
          2.3.4. SPARE PARTS IN STOCK
           GRAPHITE DIES FOR ROD PRODUCTION, CRYSTALLIZERS, QUICK JOINTS,
          
           THERMOCOUPLES, INDUCTORS, COPPER RINGS FOR INDUCTORS, LINING MATERIALS,
          
           GRAPHITE FLAKES, GRAPHITE LAUNDER, ALUMINA SILICATE PROTECTION SLEEVES,
          
           CARBOFAX PROTECTION COLLAR, AMONG OTHERS.
          
          AB. PRODUCTION UP-CAST LINE FOR COPPER TUBE
          
          1. MAIN TECHNICAL DATA
           SIZE OF FINAL PRODUCT: 12mm (1/2"), 19mm (3/4"), AND OTHERS SIZES
           WALL THICKNESS: ACCORDING TO FINAL PRODUCT
           LENGTH OF PRODUCT: AS DESIRED
           STATE OF PRODUCT: COLD ROLLED HARD COPPER TUBE
          
          2. MAIN EQUIPMENT
          
          2.1. MODIFIED UPWARD CONTINUOUS CASTING MACHINE TYPE UTY 4.5/8C, 1 SET
           SIZE OF COPPER SHELL TUBE: 40mm x 4mm
           NUMBER OF CASTING HEADS: 6
           UPCAST SPEED: 300mm ~ 400mm/MIN.
           UPCAST PITCH: 4mm ~ 6mm/TIME
           COMPOSED OF SIX CRYSTALLIZERS 
          
          2.2. STRAIGHTENING MACHINE, 6 SETS
           DIAMETER OF TUBE: 40mm
           POWER OF HAUL-OFF MOTOR: 3/4 HP, AC
           HAUL-OFF SPEED: 2800mm/MIN 
           COMPOSED OF 10 STRAIGHTENING ROLLERS, PLUS 4 HAUL-OFF ROLLERS.
           EACH STRAIGHTENING MACHINE WITH A CUTTER.
          
          2.3. SPARE PARTS
           GRAPHITE DICES AND PROTECTIVE SLEEVES FOR MORE THAN ONE YEAR PRODUCTION.
          
          B. DESCRIPTION OF DOWNSTREAM EQUIPMENT FOR DRAWING TUBE
          
          FOR THE REDUCTION OR DRAWING PROCESS OF PIPE, THERE IS DIFFERENT EQUIPMENT
          
          1. COLD TUBE ROLLING MILL MACHINE TYPE LG-30X2-H
           TUBE BLANK SIZE DIA.: 40mm x 4mm (1.575" x .157")
           TUBE BLANK LENGTH: 1.5mm - 6mm (5 - 19.5 FT.)
           DIA. OF ROLLED BLANK: 0.5mm
           ROLLED TUBE LENGTH: 6m - 7m
           MAXIMUM ROLLING FORCE: 2 x 20 T
           TRAVEL OF ROLLING STAND: 505mm
           NUMBER OF DOUBLE-TRAVEL STAND: < 120 TIMES (MIN)
           BLANK INFEED: 2, 3, 4, 5mm/TIME
           BLANK ROTATING ANGLE: 64-DEGREE/TIME
           NUMBER OF TUBES AT ONE ROLLING: 2
           DIA. OF ROLLER: DIA. 235mm MIN.
           MAIN MOTOR POWER: 40 KW, DC
           SUPPLY RANGE:
           MAIN TRANSMISSION SYSTEM/ROLLING STAND AND BASE/FEEDING SYSTEM/CORE-CLAMPING
          
           DEVICE/INTERMEDIATE LATHE/TUBE KNOCKOUT DEVICE/CHARGING PLATFORM/ELECTRICAL
          
           CONTROL SYSTEM.
          
          2. FOUR (4) 5 TON CHAIN-TYPE PULLING DEVICES A.K.A. STRAIGHT DRAW BENCHES
          
           WITH MAIN REDUCTION BOX & STAND AND PULLING TROLLEY.
           COUNTRY OF ORIGIN: CHINA
           YEAR: 1998 
           5 TON PULLING FORCE
           EACH ONE OF THESE FOUR 5-TON STRAIGHT DRAWING BENCHES HAS A MOTOR WITH
          
           THE FOLLOWING CHARACTERISTICS:
           
           BRAND: JIANGSU BEIDE ELECTRICAL MACHINERY & EQUIPMENT GROUP LTD.
           THREE-PHASE A SYNCHRONOUS MOTOR
           TYPE: Y200L2-6
           OUTPUT: 22 KW
           VOLTAGE: 440 V
           CURRENT: 38.5 A
           NOISE: 78 DB (A)
           SPEED: 1164 R/MIN.
           60 HZ
           WEIGHT: 250 KILOGRAMS
          
          3. FIVE (5) 3 TON CHAIN-TYPE PULLING DEVICES (STRAIGHT DRAW BENCHES)
          
           WITH MAIN REDUCTION BOX & STAND AND PULLING TROLLEY.
           COUNTRY OF ORIGIN: CHINA
           YEAR: 1998
           3 TON PULLING FORCE
          
           THE FIRST THREE (3) 3 TON STRAIGHT DRAWING BENCHES HAVE A MOTOR WITH
          
           THE FOLLOWING CHARACTERISTICS:
          
           BRAND: JIANGSU BEIDE ELECTRICAL MACHINERY & EQUIPMENT GROUP LTD.
           THREE-PHASE A SYNCHRONOUS MOTOR
           TYPE: Y180L-6
           OUTPUT: 15 KW
           VOLTAGE: 440 V
           CURRENT: 27.2 A
           NOISE: 78 DB (A)
           SPEED: 1164 R/MIN
           WEIGHT: 188 KG
           60 HZ
          
           THE 4TH 3 TON STRAIGHT DRAWING BENCH HAS A MOTOR WITH THE FOLLOWING
          
           CHARACTERISTICS:
          
           TYPE: Y180M-4
           18.5 KW
           440 V
           31 A
           CONNECTION:
           60 HZ
           1760 RPM
           WEIGHT: 180 KG
          
           THE 5TH 3 TON STRAIGHT DRAWING BENCH HAS A MOTOR WITH THE FOLLOWING
          
           CHARACTERISTICS:
          
           THREE PHASE INDUCTION MOTOR
           TYPE: Y200L-4
           30 KW
           440 V
           49.1 A
           CONNECTION:
           1760 RPM
           WEIGHT: 255 KG
          
          C. DESCRIPTION OF DOWNSTREAM EQUIPMENT FOR DRAWING ROD
          
          1. "Y" TYPE COPPER ROD ROLLING MACHINE (PROPERZI STYLE)
           BRAND: DONG-FANG ELECTRICAL MACHINE WORKS
           CHINA NATIONAL MACHINERY & EQUIPMENT IMPORT & EXPORT CORPORATION
          
           ANNUAL OUTPUT CAPACITY 8,000 TONS (CONSIDERING 7,000 HOURS)
           THE "Y" TYPE ROD ROLLING MACHINE IT IS COMPOSED OF:
           A) PAY-OFF STAND
           B) 12 - STAND CONTINUOUS ROLLING MACHINE
           C) TAKE-UP COILER
           D) COOLING AND LUBRICANT SYSTEM
           E) ELECTRIC CONTROL DESK
          
           PAY-OFF STAND: 1 SET
           PAY-OFF MODE: ROTARY DRIVEN PAY-OFF
           MAXIMUM SIZE OF COIL: 1500mm x 600mm x 1000mm
           INCLUDING BASE AND ROTARY STAND.
           
           12-STAND CONTINUOUS ROLLING MACHINE, 1 SET
           MODE OF ROLLING: COLD ROLLING WITH THREE ROLLERS IN "Y" SHAPE
           INLET DIAMETER OF ROD: 17mm ~ 20 mm
           No. OF STANDS: 12
           OUTLET DIAMETER OF ROD: 6.7mm ~ 8mm
           POWER OF MAIN MOTOR INCLUDES:
           -TRANSMISSION GEARBOX, 12 SETS OF STANDS, BASE AND MAIN MOTOR.
          
           TAKE-UP COILER, 1 SET
           SIZE OF COIL: 1400mm x 600mm x 1000mm
           TAKE-UP WEIGHT: 1.5 - 2 TONS
           POWER OF HAUL-OFF MOTOR: 3 KW
           POWER OF TAKE-UP MOTOR:  4 KW
           INCLUDING HAUL-OFF MECHANISM, TAKE-UP TROLLEY AND GUIDE PIPE.
          
           COOLING AND EMULSION LUBRICATION SYSTEM, 1 SET
           FLOW RATE OF EMULSION PUMPS: 100 M3/H  EACH
           POWER OF WATER PUMP: 22 KW
           EMULSION TANK, WITH CENTRIFUGAL PUMPS WITH MOTOR, PIPES, VALVES & FITTINGS,
          
           TWO (2) SETS OF FILTERS, AND 1 SET OF HEAT EXCHANGER.
           
           THIN-OIL LUBRICATION SYSTEM FOR THE GEARBOX,
           2 SETS OF OIL PUMPS OF 18 m3/H EACH.
           POWER OF MOTOR: 5.5 KW
          
          2. DRAWING MACHINE FOR ROD, 10 DIES
           BRAND: WATERBURY FARREL #1-T
           WET TYPE
           SERIES NUMBER: 19321
           MAXIMUM SPEED: 4000 FPM
           9 DRAW BENCHES FOR THE WET SECTION, 1 DRAW BENCH FOR THE DRY SECTION.
           INPUT ROD: (3/8")
           OUTPUT: (.098" - .204")
           30% OF REDUCTION PER DIE
           CONTROL PANEL
           MAIN MOTOR DATA:
            BRAND: LOUIS ALLIS
            200 HP, 460 AC VOLTS/60 CYCLES HZ/3 PHASE/1780 RPM.
           EDDY CURRENT CLUTCH:
            BRAND: LOUIS ALLIS
            200 HP, TORQUE 600 LB./FT./90 VOLTS DC, MAXIMUM 1700 RPM, 
           MAIN GEARBOX: PHILADELPHIA, MAXIMUM 1655 RPM, RATIO 3.7.1
           OVERALL DIMENSIONS: 9' F-B x 30' L x 4' HIGH
           WEIGHT: 20,000 LB. APPROXIMATE
          
          3. INTERMEDIATE FINE WIRE DRAWING MACHINE, 17 DIES
           BRAND: HEINRICH MORGAN #26 W17
           SERIAL NUMBER: MC-535-5
           MAXIMUM INPUT: 9.5mm (.0720")
           MINIMUM OUTPUT: 0.12mm (.0050")
           NUMBER OF DIE POSITIONS: 17
           ELONGATION: 26%
           SPEED: 1828m - 2440m/MIN. (6,000 - 8,000 FPM)
           MAIN MOTOR DATA:
            40 HP SIEMENS, DC, 500 ARM VOLT, 300 FIELD VOLT, 175-1750 RPM
           OVERALL DIMENSIONS: 5' W x 8'8" L x 5'8" HIGH
           WEIGHT: 12,700 LB. APPROXIMATE TOTAL
          
          4. CONTINUOUS WIRE POINTER
           SHARPENER FOR ROD, WITH FOUR ROLLERS
           BRAND: KROLLMANN
           MODEL: DWU-3TV
           SERIES NUMBER: 81-8944
           SPECIFICATIONS: @ 40,000 PSI TENSILE STRENGTH, 3/16" TO 11/16" DIAMETER
           ROLL SIZE: (2) VERTICAL 3-1/2" DIA. x 10-1/2" L (14 GROOVE)
                      (2) HORIZONTAL 3-1/2" DIA. x 10" L (13 GROOVES)
           MOTOR DATA: 5 HP, 480/60/3-1740 RPM
           OVERALL DIMENSIONS: 2'4" W x 4'7" L x 5'2" HIGH 
           WEIGHT: 2,500 LB. APPROXIMATE
          
          D. DESCRIPTION OF OTHER EQUIPMENT
          
          1. PLATE SHEAR TO CUT THE CATHODE OR PLATES
           BRAND: CINCINNATI
           MODEL No.: 6206
           CAPACITY: 25mm THICK (1" x 6" LENGTH)
           EQUIPPED WITH: 36" RANGE FRONT, OPERATED MOTOR DRIVEN BACK GAUGE, 24" GAP,
          
           HYDRAULIC HOLD DOWNS, AIR COUNTER BALANCES, SQUARING ARM, TWO FRONT GAUGE
          
           SUPPORT ARMS, FULL LENGTH TREADLE, AUTO PRESSURE LUBRICATION, 25 HP AC
          
           MOTOR DRIVE.
           
          2. AIR EXTRACTOR
           14,000 P.C.M. CAPACITY
           7.5 HP, 1750 RPM
           MOTOR BRAND: SIEMENS 220/440 V., 3 PHASES, 60 HZ
           
          3. AUTOANALYZER II
           BRAND: BRAN AND LUEBBE [BAYER]
           THIS LABORATORY DEVICE IS EQUIPPED WITH:
           - COLORMETER
           - SOFTWARE
           - SAMPLER
           - PRINTER
           AND IT IS USED TO MEASURE THE PHOSPHOROUS CONTENT IN COPPER.
           
          4. TENSILE TESTER, UNIVERSAL HYDRAULIC TESTER
           MAXIMUM LOADING CAPACITY: 300KN
           MEASURING RANGE: 0 -60 KN, 0-150 KN, 0-300 KN
           RELATIVE DIFFERENCE: + - 1 %
           MAXIMUM DISTANCE BETWEEN CLAMPS: 630mm
           MAXIMUM CLAMPING WIDTH FOR FLAT SAMPLES: 50mm
           CLAMPING DEPTH FOR FLAT SAMPLES: 0 - 20mm
           CLAMPING DIAMETER FOR ROUND SAMPLES: 10mm - 25mm
           CLAMPING DIAMETER FOR SHOULDERED ROUND SAMPLES: 10mm - 15mm
           MAXIMUM DISTANCE BETWEEN COMPRESSING PLATES: 630mm
           COMPRESSING PLATE DIAMETER: 100mm
           DISTANCE BETWEEN ROLLER STANDS FOR BENDING TEST: 100mm - 600mm
           EFFECTIVE DISTANCE BETWEEN COLUMNS FOR TENSILE TEST: 350mm
           EFFECTIVE DISTANCE BETWEEN RODS FOR COMPRESSING TEST: 208mm
          
          5. OXYGEN AND TEMPERATURE ANALYZER
           THIS EQUIPMENT MEASURES THE OXYGEN CONTENT PPM (PARTS PER MILLION)
           IN THE MOLTEN COPPER.
          
           BRAND: L&N METALLURGICAL
           TYPE: DIGISTEELAB III
           DATE: DECEMBER 1998
          
          6. AIR COMPRESSORS
           THE PLANT HAS TUBING INSTALLATION TO CONNECT ON DIFFERENT PLACES.
           ALL AIR COMPRESSORS ARE CONNECTED TO THE SAME SYSTEM, SO INCASE
           OF FAILURE, IT CAN BE USED AS A SPARE ONE.
          
          7. SHOP EQUIPMENT FOR MAINTENANCE AND PARTS FABRICATION.
          
          
          CONTACT US FOR A FORMAL QUOTATION, TO DISCUSS PRICING, OR TO SET UP AN
          
          INSPECTION VISIT BY E-MAIL, TELEPHONE OR FAX
          
          
           
          **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
           **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com



- Search equipment by:  
 


Used Equipment
Used Equipment
Used Equipment
Used Equipment
UEN is a product of and is operated by Halliburton Systems Inc of Denville NJ
Used Equipment
Used Equipment